File: gba.inc - Tab length: 1 2 4 8 - Lines: on off - No wrap: on off

@@@@@@@@@ CONTENTS @@@@@@@@@
@ 1. Key pad defines
@ 2. Display
@ 3. Sprites
@ 4. Background
@ 5. Sound
@ 6. DMA
@ 7. Interrupts
@ 8. BIOS Functions

@@@@@@@@@ 1. KEY PAD DEFINES @@@@@@@@@
KEY_A       = 1
KEY_B       = 2
KEY_SELECT  = 4
KEY_START   = 8
KEY_RIGHT   = 16
KEY_LEFT    = 32
KEY_UP      = 64
KEY_DOWN    = 128
KEY_R       = 256
KEY_L       = 512
KEYS        = 0x04000130
KEYS_HIGH   = 0x04000000
KEYS_LOW    = 0x00000130

@@@@@@@@@ 2. Display @@@@@@@@@
@ Tile modes
MODE_0 = 0x00   @ All 4 BG layers available, but no rotation/scaling
MODE_1 = 0x01   @ 3 BG layers (0-2), BG2 can rotate/scale
MODE_2 = 0x02   @ 2 BG layers (2-3), both can scale/rotate
@ Bitmap modes : BG2 only
MODE_3 = 0x03   @ 16 bit color bitmap, cuts into available sprite data area
MODE_4 = 0x04   @ Like Mode 3, but with 8-bit references (and palette)
MODE_5 = 0x05   @ 16 bit color bitmap, with backbuffer. Screen limited to 160x128

BACKBUFFER = 0x010
H_BLANK_OAM = 0x020

OBJ_MAP_2D = 0x000
OBJ_MAP_1D = 0x040

FORCE_BLANK = 0x080

BG0_ENABLE = 0x0100
BG1_ENABLE = 0x0200
BG2_ENABLE = 0x0400
BG3_ENABLE = 0x0800
OBJ_ENABLE = 0x01000        @ = SPRITES_ENABLE: enable sprites
WIN1_ENABLE = 0x02000
WIN2_ENABLE = 0x04000
WINOBJ_ENABLE = 0x08000
VRAM = 0x06000000
VPAL = 0x05000000
REG_DISPCNT = 0x04000000    @
REG_VCOUNT  = 0x04000006
@@@@@@@@@ 3. SPRITES @@@@@@@@@

@*** Attribute 0 ***
@ F E D C  B A 9 8  7 6 5 4  3 2 1 0
@ S S A M  T T D R  J J J J  J J J J
@ 0-7   (J) = Y coordinate of the sprite (pixels)
@ 8     (R) = Rotation/Scaling on/off
@ 9     (D) = 0 - sprite is single sized;
@             1 - sprite is virtually double sized
@ A-B   (T) = 00 - normal
@             01 - semi-transparent
@             10 - obj window
@ C     (M) = enables mosaic for this sprite.
@ D     (A) = 256 color if on, 16 color if off
@ E-F   (S) = Size, MSB in attribute 0, LSB in attribute 1

@ Byte 1 = Y coordinate of the sprite, in pixels
@ Byte 2
ROTATION_FLAG   =  0x100
SIZE_DOUBLE     =  0x200
MODE_NORMAL     =  0x000
MODE_TRANSPERANT=  0x400
MODE_WINDOWED   =  0x800
MOSAIC          = 0x1000
COLOR_16        = 0x0000
COLOR_256       = 0x2000
SIZE_8          = 0x0000 @ Only valid for SQUARE
SIZE_16         = 0x4000
SIZE_32         = 0x8000
SIZE_64         = 0xC000

@*** Atribute 1 ***
@ FEDC BA98 7654 3210
@ SSVH XXXI IIII IIII   (standard sprites)
@ SSFF FFFI IIII IIII   (rotation/scaling on)
@ 0-8 (I) = X coordinate of the sprite (pixels)
@ C   (H) = flip horizinal bit
@ D   (V) = flip vertical bit
@ 9-D (F) = rotation index (0-31). rotation/scaling data in OAM attribute 3
@ E-F (S) = Size of the sprite (LSB)
@           4-bit value which sets the size of the sprite in the following way:
@           00 00: 8  x 8       10 00: 8  x 16
@           00 01: 16 x 16      10 01: 8  x 32
@           00 10: 32 x 32      10 10: 16 x 32
@           00 11: 64 x 64      10 11: 32 x 64
@           01 00: 16 x 8       11 00: Not used
@           01 01: 32 x 8       11 01: Not used
@           01 10: 32 x 16      11 10: Not used
@           01 11: 64 x 32      11 11: Not used

@ Byte 3+1 bit = X coordinate of the sprite, in pixels (9-bit value)
@ Byte 4
SQUARE          = 0x0000
WIDE            = 0x4000
TALL            = 0x8000
HORIZONTAL_FLIP = 0x1000
VERTICAL_FLIP   = 0x2000
OAM             = 0x07000000
OBJPAL          = 0x5000200
CHARMEM         = 0x6010000     @ SPRITE MEM
CHARMEM_MODE3   = 0x6012BFD

@@@@@@@@@ 4. Background @@@@@@@@@
@ These four addresses handle the BG layers
REG_BG0CNT  = 0x4000008
REG_BG1CNT  = 0x400000A
REG_BG2CNT  = 0x400000C
REG_BG3CNT  = 0x400000E

REG_BG0HOFS = 0x4000010 @ Horizontal offset
REG_BG0VOFS = 0x4000012 @ Vertical offset
REG_BG1HOFS = 0x4000014
REG_BG1VOFS = 0x4000016
REG_BG2HOFS = 0x4000018
REG_BG2VOFS = 0x400001A
REG_BG3HOFS = 0x400001C
REG_BG3VOFS = 0x400001E
REG_BG2PA   = 0x4000020
REG_BG2PB   = 0x4000022
REG_BG2PC   = 0x4000024
REG_BG2PD   = 0x4000026
REG_BG2X    = 0x4000028
REG_BG2X_L  = 0x4000028
REG_BG2X_H  = 0x400002A
REG_BG2Y    = 0x400002C
REG_BG2Y_L  = 0x400002C
REG_BG2Y_H  = 0x400002E
REG_BG3PA   = 0x4000030
REG_BG3PB   = 0x4000032
REG_BG3PC   = 0x4000034
REG_BG3PD   = 0x4000036
REG_BG3X    = 0x4000038
REG_BG3X_L  = 0x4000038
REG_BG3X_H  = 0x400003A
REG_BG3Y    = 0x400003C
REG_BG3Y_L  = 0x400003C
REG_BG3Y_H  = 0x400003E

BG_COLOR_16     = 0x0
BG_MOSAIC_ENABLE = 0x40
BG_COLOR_256    = 0x80

TEXTBG_SIZE_256x256 = 0x0       @ 16x16 8*8 for text backgrounds
TEXTBG_SIZE_512x256 = 0x4000    @ 64x32
TEXTBG_SIZE_256x512 = 0x8000    @ 32x64
TEXTBG_SIZE_512x512 = 0xC000    @ 64x64

ROTBG_SIZE_128x128 = 0x0        @ 16x16 8*8 tiles for rotational backgrounds
ROTBG_SIZE_256x256 = 0x4000     @ 32x32 tiles
ROTBG_SIZE_512x512 = 0x8000     @ 64x64 tiles
ROTBG_SIZE_1024x1024 = 0xC000   @ 128x128 tiles

WRAPAROUND = 0x2000

CHAR_SHIFT = 2      @ Used to shift the number over to the right place in REG_BGxCNT
SCREEN_SHIFT = 8

@ Defines for all 32 screen (map data) blocks and 4 character (bitmap data) blocks
@ Some of this might not be correct
CHAR_BLOCK_0 = 0x6000000
CHAR_BLOCK_1 = 0x6004000
CHAR_BLOCK_2 = 0x6008000
CHAR_BLOCK_3 = 0x600C000
SCREEN_BLOCK_0 = 0x6000000
SCREEN_BLOCK_1 = 0x6000800
SCREEN_BLOCK_2 = 0x6001000
SCREEN_BLOCK_3 = 0x6001800
SCREEN_BLOCK_4 = 0x6002000
SCREEN_BLOCK_5 = 0x6002800
SCREEN_BLOCK_6 = 0x6003000
SCREEN_BLOCK_7 = 0x6003800
SCREEN_BLOCK_8 = 0x6004000
SCREEN_BLOCK_9 = 0x6004800
SCREEN_BLOCK_10 = 0x6005000
SCREEN_BLOCK_11 = 0x6005800
SCREEN_BLOCK_12 = 0x6006000
SCREEN_BLOCK_13 = 0x6006800
SCREEN_BLOCK_14 = 0x6007000
SCREEN_BLOCK_15 = 0x6007800
SCREEN_BLOCK_16 = 0x6008000
SCREEN_BLOCK_17 = 0x6008800
SCREEN_BLOCK_18 = 0x6009000
SCREEN_BLOCK_19 = 0x6009800
SCREEN_BLOCK_20 = 0x600A000
SCREEN_BLOCK_21 = 0x600A800
SCREEN_BLOCK_22 = 0x600B000
SCREEN_BLOCK_23 = 0x600B800
SCREEN_BLOCK_24 = 0x600C000
SCREEN_BLOCK_25 = 0x600C800
SCREEN_BLOCK_26 = 0x600D000
SCREEN_BLOCK_27 = 0x600D800
SCREEN_BLOCK_28 = 0x600E000
SCREEN_BLOCK_29 = 0x600E800
SCREEN_BLOCK_30 = 0x600F000
SCREEN_BLOCK_31 = 0x600F800

@@@@@@@@@ 5. Sound @@@@@@@@@
@ To turn sound on:
@   ldr r1,=REG_SOUNDCNT_X
@   ldr r0,=0x0081
@   str r0,[r1]

REG_SOUND1CNT_L = 0x04000060 @ Sound 1 Sweep control
REG_SOUND1CNT_H = 0x04000062 @ Sound 1 Length, wave duty and envelope control
REG_SOUND1CNT_X = 0x04000064 @ Sound 1 Frequency, reset and loop control
REG_SOUND2CNT_L = 0x04000068 @ Sound 2 Length, wave duty and envelope control
REG_SOUND2CNT_H = 0x0400006C @ Sound 2 Frequency, reset and loop control
REG_SOUND3CNT_L = 0x04000070 @ Sound 3 Enable and wave ram bank control
REG_SOUND3CNT_H = 0x04000072 @ Sound 3 Sound Length and output level control
REG_SOUND3CNT_X = 0x04000074 @ Sound 3 Frequency, reset and loop control
REG_SOUND4CNT_L = 0x04000078 @ Sound 4 Length, output level and envelope control
REG_SOUND4CNT_H = 0x0400007C @ Sound 4 Noise parameters, reset and loop control
REG_SOUNDCNT_L  = 0x04000080 @ Sound 1-4 Output level and Stereo control
REG_SOUNDCNT_H  = 0x04000082 @ Direct Sound control and Sound 1-4 output ratio
REG_SOUNDCNT_X  = 0x04000084 @ Master sound enable and Sound 1-4 play status
REG_SOUNDBIAS   = 0x04000088 @ Sound bias and Amplitude resolution control
REG_WAVE_RAM0_L = 0x04000090 @ Sound 3 samples 0-3
REG_WAVE_RAM0_H = 0x04000092 @ Sound 3 samples 4-7
REG_WAVE_RAM1_L = 0x04000094 @ Sound 3 samples 8-11
REG_WAVE_RAM1_H = 0x04000096 @ Sound 3 samples 12-15
REG_WAVE_RAM2_L = 0x04000098 @ Sound 3 samples 16-19
REG_WAVE_RAM2_H = 0x0400009A @ Sound 3 samples 20-23
REG_WAVE_RAM3_L = 0x0400009C @ Sound 3 samples 23-27
REG_WAVE_RAM3_H = 0x0400009E @ Sound 3 samples 28-31
REG_FIFO_A_L    = 0x040000A0 @ Direct Sound channel A samples 0-1
REG_FIFO_A_H    = 0x040000A2 @ Direct Sound channel A samples 2-3
REG_FIFO_B_L    = 0x040000A4 @ Direct Sound channel B samples 0-1
REG_FIFO_B_H    = 0x040000A6 @ Direct Sound channel B samples 2-3

@@@@@@@@@ 6. DMA @@@@@@@@@

DMA_ENABLE  = 0x80000000
DMA_INTERUPT_ENABLE = 0x40000000
DMA_TIMEING_IMMEDIATE   = 0x00000000
DMA_TIMEING_VBLANK  = 0x10000000
DMA_TIMEING_HBLANK  = 0x20000000
DMA_TIMEING_SYNC_TO_DISPLAY = 0x30000000
DMA_16  = 0x00000000
DMA_32  = 0x04000000
DMA_REPEAT  = 0x02000000
DMA_SOURCE_INCREMENT    = 0x00000000
DMA_SOURCE_DECREMENT    = 0x00800000
DMA_SOURCE_FIXED    = 0x01000000
DMA_DEST_INCREMENT  = 0x00000000
DMA_DEST_DECREMENT  = 0x00200000
DMA_DEST_FIXED  = 0x00400000
DMA_DEST_RELOAD = 0x00600000

@ register defines, ripped from GBA.h from DevKitAdvanced
REG_DMA0SAD     = 0x40000B0
REG_DMA0SAD_L   = 0x40000B0
REG_DMA0SAD_H   = 0x40000B2
REG_DMA0DAD     = 0x40000B4
REG_DMA0DAD_L   = 0x40000B4
REG_DMA0DAD_H   = 0x40000B6
REG_DMA0CNT     = 0x40000B8
REG_DMA0CNT_L   = 0x40000B8
REG_DMA0CNT_H   = 0x40000BA
REG_DMA1SAD     = 0x40000BC
REG_DMA1SAD_L   = 0x40000BC
REG_DMA1SAD_H   = 0x40000BE
REG_DMA1DAD     = 0x40000C0
REG_DMA1DAD_L   = 0x40000C0
REG_DMA1DAD_H   = 0x40000C2
REG_DMA1CNT     = 0x40000C4
REG_DMA1CNT_L   = 0x40000C4
REG_DMA1CNT_H   = 0x40000C6
REG_DMA2SAD     = 0x40000C8
REG_DMA2SAD_L   = 0x40000C8
REG_DMA2SAD_H   = 0x40000CA
REG_DMA2DAD     = 0x40000CC
REG_DMA2DAD_L   = 0x40000CC
REG_DMA2DAD_H   = 0x40000CE
REG_DMA2CNT     = 0x40000D0
REG_DMA2CNT_L   = 0x40000D0
REG_DMA2CNT_H   = 0x40000D2
REG_DMA3SAD     = 0x40000D4
REG_DMA3SAD_L   = 0x40000D4
REG_DMA3SAD_H   = 0x40000D6
REG_DMA3DAD     = 0x40000D8
REG_DMA3DAD_L   = 0x40000D8
REG_DMA3DAD_H   = 0x40000DA
REG_DMA3CNT     = 0x40000DC
REG_DMA3CNT_L   = 0x40000DC
REG_DMA3CNT_H   = 0x40000DE

@ These defines group common options to save typing
@ You may notice that I don't have to include the option to increment the source and address register as that is the default.
@ DMA_32NOW DMA_ENABLE|DMA_TIMEING_IMMEDIATE|DMA_32
@ DMA_16NOW DMA_ENABLE|DMA_TIMEING_IMMEDIATE|DMA_16
DMA_32NOW   = 0x84000000
DMA_16NOW   = 0x80000000

@@@@@@@@@ 7. INTERRUPTS @@@@@@@@@

INT_VBLANK      = 0x0001
INT_HBLANK      = 0x0002
INT_VCOUNT      = 0x0004        @ you can set the display to generate an interrupt when it reaches a particular line on the screen
INT_TIMER0      = 0x0008
INT_TIMER1      = 0x0010
INT_TIMER2      = 0x0020
INT_TIMER3      = 0x0040
INT_COMUNICATION    = 0x0080    @ Serial communication interupt
INT_DMA0        = 0x0100
INT_DMA1        = 0x0200
INT_DMA2        = 0x0400
INT_DMA3        = 0x0800
INT_KEYBOARD    = 0x1000
INT_CART        = 0x2000        @ The cart can actually generate an interupt

INT_ENABLE      = 0x1

REG_INTADDR     = 0x3007FFC

REG_IE          = 0x4000200     @ Interrupt Enable Register
REG_IF          = 0x4000202
REG_IME         = 0x4000208     @ Interrupt Master Enable Register
                                @ bit 0 = Enable interupts (1)/Disable all interrupts (0)
                                @         if 1, it will look in REG_IE for interrupt type
REG_DISPSTAT    = 0x4000004     @ Display Status:
STAT_VBLANK     = 1             @ bit 0 = V Refresh (0 = VDraw, 1 = VBlank)
STAT_HBLANK     = 2             @ bit 1 = H Refresh (0 = HDraw, 1 = HBlank)
                                @ bit 2 = VCount Triggered Status (1 = Y trigger interrupt occured)
STAT_VBLANK_IRQ = 8             @ bit 3 = Enables LCD VBlank IRQ
STAT_HBLANK_IRQ = 16            @ bit 4 = Enables LCD HBlank IRQ
                                @ bit 5 = Enables VCount trigger
                                @ bit 8-F = VCount line trigger: Vcount value you wish to trigger an interrupt
   

@@@@@@@@@ 8. BIOS FUNCTIONS @@@@@@@@@

SoftReset           = 0x00
RegisterRamReset    = 0x01
Halt                = 0x02
Stop_Sleep          = 0x03
IntrWait            = 0x04
VBlankIntrWait      = 0x05
Div                 = 0x06
DivArm              = 0x07
Sqrt                = 0x08
ArcTan              = 0x09
ArcTan2             = 0x0A
CpuSet              = 0x0B
CpuFastSet          = 0x0C
GetBiosChecksum     = 0x0D
BgAffineSet         = 0x0E
ObjAffineSet        = 0x0F
BitUnPack           = 0x10
LZ77UnCompWram      = 0x11
LZ77UnCompVram      = 0x12
HuffUnComp          = 0x13
RLUnCompWram        = 0x14
RLUnCompVram        = 0x15
Diff8bitUnFilterWram    = 0x16
Diff8bitUnFilterVram    = 0x17
Diff16bitUnFilter   = 0x18
SoundBias           = 0x19
SoundDriverInit     = 0x1A
SoundDriverMode     = 0x1B
SoundDriverMain     = 0x1C
SoundDriverVSync    = 0x1D
SoundChannelClear   = 0x1E
MidiKey2Freq        = 0x1F
SoundWhatever0      = 0x20
SoundWhatever1      = 0x21
SoundWhatever2      = 0x22
SoundWhatever3      = 0x23
SoundWhatever4      = 0x24
MultiBoot           = 0x25
HardReset           = 0x26
CustomHalt          = 0x27
SoundDriverVSyncOff = 0x28
SoundDriverVSyncOn  = 0x29
SoundGetJumpList    = 0x2A